Standard Colors

Details:

Ready for use Plastisol Colors and Direct Super White come with excellent opacity and elongation characteristic. Easy to run on automatic machines with quick flash to enhance the maximum productivity. NF series are giving all-round fastness for all kinds of substrates, natural and synthetic fabrics. There are 20 colors in NF-Standard Color Series.

Specialty:

Excellent all round durable fastness.
Print through fine mesh.
Soft finish prints and high glossy effect.
High resistance in bleeding.
No harmful or distracting odors in the work place.

Guidance:

This can be used straight from the drum. Well stirring before applying is very important.
Multiple strokes may be required when printing by hand. To yield a high deposit, use of rounded squeegees or other techniques is recommended when printing on automatics.
Plastisol Ultimate Polar White is a premium Flash White for a purpose of under base printing on dark ground that can provide the best coverage and helpful for sequence color printing on it.
Viscosity can be reduced by adding different percentage of Plastisol 700 Reducer to meet client’s intended viscosity and gel or curing will not be affected.
To create a superior soft hand touch, Plastisol 710 Softener can be mixed 10% max by weight. Over dosage may occur difficulty in drying or curing.

Precautions:

All the above printing guides are required to adjust the off-contact distance, squeegee pressure and blade speed to meet up intended performance, best coverage and brightest print.
Avoid excessive over-flashing, as it can result in poor inter-coat adhesion of overprint colors.
Any emulsion compatible with Plastisol inks.
Failure to cure ink properly can result in poor wash fastness, inferior adhesion, and unacceptable durability.
Do not dry clean, bleach or iron printed area.
Containers must maintain seal while not in use.
On some types of fabric, dye migration may occur. Hence, fabric pre-testing is necessary before bulk production.
Any application not referred in this Product Information should be pre-tested or consulted with Primus Technical Service prior to print.

Printing Parameters:

	100% Cotton/Poly Cotton/Athletic wear/ Synthetic fabrics		Gel: 120-140℃(229℉) x 4-6 seconds Cure: 150-160℃(319-355℉) ×3 minutes
	Durometer: 70-80 Edge: Rounded or Sharp		40-305t/in (16-120t/cm)
	Additive 700 Reducer Additive 710 Softener max. 10% by weight		18-40℃(65-90℉) Use within one year of receipt. Avoid exposing under direct sunlight. Keep drums sealed tight at all times.
	Additive Screen Cleaner P3		Available upon request (MSDS)